SMC MGP-Z Series. Compact Guide Cylinder, With Air cushion, MGPM20-75AZ-A93 Size_008^40 ● Exceptionally strong fiberglass handles

● Exceptionally strong fiberglass handles with heavy vinyl grips for comfort and slip resistance

prinkle over a wide area by changing the angle and range

It is a free drill for woodworking 2-blade type with excellent cutting balance and cutting speed

due to contact seal   Speed capability  Good Good Limited by contact seals  Grease-sealing effectiveness  Good Better than ZZ type  Slightly better than VV type  Dust resistance Good Better than ZZ type (usable in moderately dusty environments) Best (usable even in very dusty environments)  Water resistance Not suitable Not suitable Good (usable even if fluid is splashed on bearing)   Operating temperature –10 to +110 °C –10 to +110 °C –10 to +110 °C   Note (1) The above temperature range applies to standard bearings

No-load rotation speed (rpm): 20000

SMC MGP-Z Series. Compact Guide Cylinder, With Air cushion, MGPM20-75AZ-A93 Size_008^40 ● Exceptionally strong fiberglass handlesOVERVIEW The new style MGP has shorter guide rods and thinner plates, allowing up to 17% weight reduction over the original MGP. This series is designed for high side load applications found in material handling, lifting and grading. The cylinder utilizes a compact design by integrating the cylinder body as part of the guide body. As the stroke length increases, the bearing length also increases, thus improving the load carrying capacity of the